Surfaces for Application: Vinyl lettering can be placed anywhere including walls, windows, wood, tile, glass, plastic, etc.

Materials Needed: Masking/painter's tape, measuring tape, level, wooden press (included with each order)

Application Preparation:  Clean application surface thoroughly with wet cloth and allow to dry

Application: Lettering is pre-spaced, pre-cut, and arrives as a large sticker.

1. Carefully line up lettering in desired location.  Use masking/painter's tape to hold lettering in place for viewing BEFORE removing the backing.

                                                                             2. Raise lettering from the bottom (the top is still taped to the surface) and remove backing.  This will expose sticky side.

3. Use wooden press (provided) to firmly stick each letter to application surface.

4. Once pressed to surface, remove paper by slowly pulling away.

5. Use wooden press to trace each letter once front paper is removed.